{"title":"Control Arms","description":"\u003cp\u003eControl arms connect the axle or steering knuckle to the frame and set how the wheel moves up and down. This category covers upper and lower arms from Ridetech Suspension, Icon Vehicle Dynamics, Fabtech, TeraFlex, Dorman Products, ReadyLift Suspension \/ Logiq Air, Camburg Engineering and JKS Manufacturing.\u003c\/p\u003e\u003cp\u003eBefore you buy, confirm the year, make, model and drive type (2WD or 4WD) against the fitment on the product page. Check whether you need an upper or lower arm, and whether it goes on the front or rear. If your truck has a lift or lowering kit, match the arm to that setup. Replace worn arms in pairs when you can, and plan on an alignment afterward.\u003c\/p\u003e","products":[{"product_id":"lower-link-axle-brackts-artec-industries-br1079-pair","title":"Lower Link Axle Brackts Artec Industries BR1079; Pair","description":"\u003cp\u003eArtec Industries BR1079 Lower Link Axle Brackts; Pair.\u003c\/p\u003e\u003cp\u003eArtec Industries BR1079 Lower Link Axle Brackts are sold as a pair.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":51706321633562,"sku":"ACIBR1079","price":88.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/31F05aUBSoL.jpg?v=1771256359"},{"product_id":"artec-industries-full-hydro-hs6151-gnkq-weld-on-high-steer-arms-05-plus-superduty-1-pack","title":"Artec Industries Full Hydro HS6151-GNKQ Weld-On High Steer Arms 05 Plus SuperDuty, 1 Pack","description":"\u003cp\u003eFull Hydro Weld-On High Steer Arms - 05 plus Super Duty.\u003c\/p\u003e\u003cp\u003eWeld on arms affordable for the 05 plus Super Duty Knuckles to help eliminate those swap steering issues.\u003c\/p\u003e\u003cp\u003eFor the best steering geometry and clearances, fully fabricated.\u003c\/p\u003e\u003cp\u003eBest alignment of tie rod and hydraulic steering ram is engineered for maximum strength and longevity.\u003c\/p\u003e\u003cp\u003eIncludes knuckle bolt Kits (8 inch long bolt, sleeve and stover locking nut) and all internal gusseting.\u003c\/p\u003e\u003cp\u003eThe driver side knuckle hole will need to be drilled out to 3\/4 inch.\u003c\/p\u003e\u003cp\u003eGround down will need to be the casting remnants on the front of knuckle.\u003c\/p\u003e\u003cp\u003eKnuckles from 05-10 are slightly different than 11 plus, so we've etched a trim line on the laser cut part that will need to be trimmed off.\u003c\/p\u003e\u003cp\u003eMinor fabrication and welding are required.\u003c\/p\u003e\u003cp\u003eThis kit is recommended to be installed only by a competent welder.\u003c\/p\u003e\u003cp\u003eFeatures: Sold as Each.\u003c\/p\u003e\u003cp\u003eBest used with our new Super Duty 60 Full Hydro Ram Mount.\u003c\/p\u003e\u003cp\u003eLINK Included Knuckle Bolts and tapered spacers for tight fit and increased strength.\u003c\/p\u003e\u003cp\u003eWelds directly to factory knuckles (2005 and up Super Duty).\u003c\/p\u003e\u003cp\u003e3\/4 inch bolt holes for uncompromising steering strength.\u003c\/p\u003e\u003cp\u003ePrecision Laser Cut from 1\/4 inch steel and CNC Bent for accurate fitment.\u003c\/p\u003e\u003cp\u003eMinimal modification to OEM knuckle needed.\u003c\/p\u003e\u003cp\u003eRod end bolts not included.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":51706322878746,"sku":"ACIHS6151","price":296.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/41Zqb4L5vRL.jpg?v=1771256455"},{"product_id":"artec-industries-lca-bracket-jk-front-axle-pair","title":"Artec Industries Lca Bracket Jk Front Axle (Pair)","description":"\u003cp\u003eJK FRONT AXLE LCA BRACKETS (PAIR)\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":51706324812058,"sku":"ACIJK4412","price":88.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/318lMRPIjqL.jpg?v=1771256567"},{"product_id":"jk-apex-rear-axle-truss-artec-industries-jk4422","title":"JK APEX REAR AXLE TRUSS Artec Industries JK4422","description":"\u003cp\u003eArtec Industries Apex Rear Axle Truss for 07-18 Jeep Wrangler JK.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":51706324975898,"sku":"ACIJK4422","price":136.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/41QBSe-sCZL.jpg?v=1771256576"},{"product_id":"artec-industries-lca-bracket-jk4427-jk-rear-s-with-skids-2-625-mounting-width","title":"Artec Industries LCA Bracket JK4427 (JK Rear s with Skids 2.625\" mounting width)","description":"\u003cp\u003eJK rear LCA brackets with skids are made of material designed to last a long time and are engineered for any and every type of automotive vehicle with four wheels.\u003c\/p\u003e\u003cp\u003eThey are made in the United States.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":51706325434650,"sku":"ACIJK4427","price":168.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/411KYUzeLbL.jpg?v=1771256592"},{"product_id":"jl4509-gnkq-artec-industries-jl-rear-lower-control-arm-skids-1-pack","title":"JL4509-GNKQ Artec Industries JL Rear Lower Control Arm Skids, 1 Pack","description":"\u003cp\u003eJL Rear Lower Control Arm Skids.\u003c\/p\u003e\u003cp\u003eDesigned to take serious abuse, these heavy duty skids reinforce your JL rear axle lower control arm brackets.\u003c\/p\u003e\u003cp\u003eThe precision cut and formed components of this setup are 1\/4 inch thick, meaning they will install easily and protect your brackets and lower control arms.\u003c\/p\u003e\u003cp\u003eFeatures include: mild steel of 1\/4 inch.\u003c\/p\u003e\u003cp\u003eCNC cut and bent for great fitment.\u003c\/p\u003e\u003cp\u003ePrecision fit around existing lower control arm brackets.\u003c\/p\u003e\u003cp\u003eValuable reinforcement is provided to an area prone to abuse.\u003c\/p\u003e\u003cp\u003eThe wrap around design provides protection for both OEM and aftermarket joints.\u003c\/p\u003e\u003cp\u003eNote: General welding and fabrication skills are required for this kit.\u003c\/p\u003e\u003cp\u003eWelding should only be performed by a competent welder.\u003c\/p\u003e\u003cp\u003eArtec Industries implies no guarantees or warranties and is not liable for improper installation.\u003c\/p\u003e\u003cp\u003eSome grinding and fitment may be required during installation of this kit.\u003c\/p\u003e\u003cp\u003eEvery axle varies slightly, and some fabrication may be necessary.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":51706326810906,"sku":"ACIJL4509","price":69.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/51COvQScXpL.jpg?v=1771256659"},{"product_id":"jl-rear-lower-control-arm-bolt-on-skids-artec-industries-1-pack","title":"JL Rear Lower Control Arm Bolt-On Skids Artec Industries, 1 Pack","description":"\u003cp\u003eHD Rear Lower Control Arm Bolt-on Skids for Jeep Wrangler JL.\u003c\/p\u003e\u003cp\u003eProtect the rear axle LCA and shock brackets on your 2018 and up Jeep JL (All 4x4 models).\u003c\/p\u003e\u003cp\u003eThese skid plates are heavy duty and protect the factory brackets, so you will not have to worry about damaging the OEM bracket.\u003c\/p\u003e\u003cp\u003eProtect it before damage occurs.\u003c\/p\u003e\u003cp\u003eThe integrated skid plate on the bottom of the bracket wraps around the joint and shock, protecting it from direct impact and decreasing premature wear on the joint.\u003c\/p\u003e\u003cp\u003eThe design of the skid plate does not restrict the movement of the joint.\u003c\/p\u003e\u003cp\u003eDetails: Sold as a Pair!\u003c\/p\u003e\u003cp\u003eFits over the OEM LCA bracket with no trimming, direct bolt-on.\u003c\/p\u003e\u003cp\u003eModeled using state-of-the-art 3D modeling with OEM Jeep files.\u003c\/p\u003e\u003cp\u003eMade from 3\/16 inch thick boxed steel plate for strength and impact resistance.\u003c\/p\u003e\u003cp\u003eTwo-stage hard powder coated for long-lasting protection.\u003c\/p\u003e\u003cp\u003eUtilizes factory hardware.\u003c\/p\u003e\u003cp\u003eNote: This bracket should be installed by a competent mechanic and tightened to factory specs.\u003c\/p\u003e\u003cp\u003eArtec Industries is not liable for incorrect installation.\u003c\/p\u003e\u003cp\u003eMay not install if factory brackets are bent and bashed from rocks.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":51706326876442,"sku":"ACIJL4599","price":153.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/31knfd0iFXL.jpg?v=1771256667"},{"product_id":"artec-industries-short-7-8-high-misalignment-spacers-ss-pair-3-4-inch-black-sp1403","title":"Artec Industries Short 7\/8\" High Misalignment Spacers SS Pair 3\/4 Inch Black SP1403","description":"\u003cp\u003eThese spacers are ideal for using any heim that has a 7\/8\" bore and for installation in limited space locations.\u003c\/p\u003e\u003cp\u003eThey are also suitable for use in steering applications.\u003c\/p\u003e\u003cp\u003eThe overall width when installed on a 7\/8\" rod end measures 1.625\".\u003c\/p\u003e\u003cp\u003eThey fit 3\/4\" bolts.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":51706332348698,"sku":"ACISP1403","price":44.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/51MH1iB0g0L.jpg?v=1771257004"},{"product_id":"afe-control-adjustable-front-end-link-set-blue-bmw-m2-f87-15-21-m3-m4-f80-82-83-15-20-l6-3-0l-tt-n55-s55-442-502001fl","title":"aFe CONTROL Adjustable Front End Link Set Blue BMW M2 (F87) 15-21\/M3\/M4 (F80\/82\/83) 15-20 L6-3.0L (tt) N55\/S55 442-502001FL","description":"\u003cp\u003eThe adjustable end link set is for BMW M2 (F87) models from 2015 to 2021.\u003c\/p\u003e\u003cp\u003eIt also fits M3 and M4 (F80\/82\/83) models from 2015 to 2020.\u003c\/p\u003e\u003cp\u003eThis set is compatible with L6-3.0L (tt) N55\/S55 engines.\u003c\/p\u003e","brand":"aFe Power","offers":[{"title":"Default Title","offer_id":51706846970138,"sku":"AFE442-502001FL","price":414.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/51rsRMp89xL.jpg?v=1771270493"},{"product_id":"afe-control-upper-control-arms-05-20-tacoma-gunmetal-grey","title":"aFe Control Upper Control Arms 05-20 Tacoma - Gunmetal Grey","description":"\u003cp\u003eFront Upper Control Arms by aFe Control Series.\u003c\/p\u003e\u003cp\u003eQuantity: 2 per Pack.\u003c\/p\u003e\u003cp\u003eIf you are searching for the finest suspension part, look no further than this performance product by aFe, thoughtfully designed with state of the art technology.\u003c\/p\u003e","brand":"aFe Power","offers":[{"title":"Default Title","offer_id":51706874200346,"sku":"AFE460-72T001-G","price":1247.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/61DD-zu-QUL.jpg?v=1771271516"},{"product_id":"afe-power-billet-control-uniball-upper-control-arm-kit-red-toyota-tacoma-24-26-4runner-2025-l4-2-4l-t-460-72t006-r","title":"aFe Power Billet CONTROL Uniball Upper Control Arm Kit Red Toyota Tacoma 24-26\/ 4Runner 2025 L4-2.4L (t) 460-72T006-R","description":"\u003cp\u003eThe aFe Power CONTROL Billet Uniball Upper Control Arm Kit is designed for Toyota Tacoma 24-26 and 4Runner 2025 with L4-2.4L (t) engine.\u003c\/p\u003e\u003cp\u003eThis kit includes all necessary components for installation.\u003c\/p\u003e\u003cp\u003eIt is engineered to meet the specifications of the vehicle.\u003c\/p\u003e","brand":"aFe Power","offers":[{"title":"Default Title","offer_id":51706874560794,"sku":"AFE460-72T006-R","price":1617.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/51WXWTO3f1L.jpg?v=1771271520"},{"product_id":"old-man-emu-control-arm-front-adjustable-lcajlfr-for-use-w-jeep-jl","title":"Old Man Emu Control Arm Front Adjustable LCAJLFR For Use w\/Jeep JL","description":"\u003cp\u003eThe adjustable front control arm LCAJLFR is designed for use with Jeep JL.\u003c\/p\u003e\u003cp\u003eOld Man Emu manufactures this control arm for enhanced performance.\u003c\/p\u003e","brand":"ARB Usa\/Old Man Emu","offers":[{"title":"Default Title","offer_id":51708864626970,"sku":"ARBLCAJLFR","price":533.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/71t5oLnZE4L.jpg?v=1771324261"},{"product_id":"lwr-trailing-arms-arb-80-105-r-hd-lta3043","title":"Lwr Trailing Arms ARB 80\/105 R Hd (LTA3043)","description":"\u003cp\u003eARB Lwr Trailing Arms 80\/105 R Hd (LTA3043) are designed for durability and function.\u003c\/p\u003e\u003cp\u003eThese trailing arms are suitable for various applications.\u003c\/p\u003e\u003cp\u003eThe part number for these arms is LTA3043.\u003c\/p\u003e","brand":"ARB Usa\/Old Man Emu","offers":[{"title":"Default Title","offer_id":51708864659738,"sku":"ARBLTA3043","price":628.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/41FuUxtxHSL.jpg?v=1771324266"},{"product_id":"lwr-trailing-arms-arb-gq-gu-r-hd-lta3044","title":"Lwr Trailing Arms ARB Gq\/Gu R Hd (LTA3044)","description":"\u003cp\u003eARB Lwr Trailing Arms Gq\/Gu R Hd (LTA3044) are designed for durability and function in real-world conditions.\u003c\/p\u003e\u003cp\u003eARB Lwr Trailing Arms Gq\/Gu R Hd (LTA3044) are proven and tested for performance.\u003c\/p\u003e","brand":"ARB Usa\/Old Man Emu","offers":[{"title":"Default Title","offer_id":51708864692506,"sku":"ARBLTA3044","price":452.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/31ReUFPKffL_7d9dd017-c743-439e-a40a-ca4b055c50ef.jpg?v=1771324269"},{"product_id":"upper-control-arms-ome-uca0001-for-toyota-land-cruiser-200-series-2007-on-by-old-man-emu","title":"Upper Control Arms OME UCA0001 for Toyota Land Cruiser 200 series 2007- ON by Old Man Emu…","description":"\u003cp\u003eFront Upper Control Arms are released by Old Man Emu for a range of popular 4WDs.\u003c\/p\u003e\u003cp\u003eWhen fitted with a suspension lift, an IFS vehicle's original caster and camber results can be pushed outside the factory adjustment settings.\u003c\/p\u003e\u003cp\u003eGenerally, IFS vehicles have a few degrees of adjustment in their camber and caster from factory, so adding an OME Upper Control Arm brings the alignment cams back into an acceptable range for both caster and camber adjustment.\u003c\/p\u003e","brand":"ARB Usa\/Old Man Emu","offers":[{"title":"Default Title","offer_id":51708895035674,"sku":"ARBUCA0001","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/61Go6hC0c5L.jpg?v=1771325636"},{"product_id":"upper-control-arms-ome-uca0004-for-toyota-prado-120-series-and-150-series-by-old-man-emu","title":"Upper Control Arms OME UCA0004 for Toyota Prado 120 Series and 150 series by Old Man Emu…","description":"\u003cp\u003eOld Man Emu is pleased to release Front Upper Control Arms for a range of popular 4WDs.\u003c\/p\u003e\u003cp\u003eWhen fitted with a suspension lift, an IFS vehicle can push the original caster and camber results outside the factory adjustment settings.\u003c\/p\u003e\u003cp\u003eGenerally, IFS vehicles have a few degrees of adjustment in their camber and caster from factory, so adding an OME Upper Control Arm brings the alignment cams back into an acceptable range for both caster and camber adjustment.\u003c\/p\u003e","brand":"ARB Usa\/Old Man Emu","offers":[{"title":"Default Title","offer_id":51708895166746,"sku":"ARBUCA0004","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/61Go6hC0c5L_b9472a19-3362-484a-89db-1a4e9a04671c.jpg?v=1771325640"},{"product_id":"upper-control-arms-ome-uca0005-for-toyota-tacoma-2005-2015-and-2015-on-by-old-man-emu","title":"Upper Control Arms OME UCA0005 for Toyota Tacoma 2005-2015 and 2015 - ON by Old Man Emu","description":"\u003cp\u003eOld Man Emu is pleased to release Upper Control Arms for a range of popular 4WDs.\u003c\/p\u003e\u003cp\u003eWhen fitted with a suspension lift, an IFS vehicle's original caster and camber results can be pushed outside the factory adjustment settings.\u003c\/p\u003e\u003cp\u003eGenerally, IFS vehicles have a few degrees of adjustment in their camber and caster from factory, so adding an OME Upper Control Arm brings the alignment cams back into an acceptable range for both camber and caster adjustment.\u003c\/p\u003e","brand":"ARB Usa\/Old Man Emu","offers":[{"title":"Default Title","offer_id":51708895363354,"sku":"ARBUCA0005","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/61Go6hC0c5L_df1d9929-8732-43d5-b6f2-a2c30fbc2379.jpg?v=1771325644"},{"product_id":"arb-2021-ome-ford-bronco-front-upper-control-arms-pair-black","title":"ARB 2021+ OME Ford Bronco Front Upper Control Arms (Pair) - Black","description":"\u003cp\u003eThe ARB OME Front Upper Control Arms are designed for the 2021+ Ford Bronco.\u003c\/p\u003e\u003cp\u003eThis pair features a black finish.\u003c\/p\u003e","brand":"ARB Usa\/Old Man Emu","offers":[{"title":"Default Title","offer_id":51708895559962,"sku":"ARBUCA0011","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/31IxjD_o7rL.jpg?v=1771325648"},{"product_id":"toyota-tundra-arb-22-heavy-duty-upper-control-arms","title":"Toyota Tundra ARB 22+ Heavy Duty Upper Control Arms","description":"\u003cp\u003eARB 22+ Toyota Tundra Heavy Duty Upper Control Arms.\u003c\/p\u003e\u003cp\u003eARB 22+ Toyota Tundra Heavy Duty Upper Control Arms.\u003c\/p\u003e","brand":"ARB Usa\/Old Man Emu","offers":[{"title":"Default Title","offer_id":51708895723802,"sku":"ARBUCA0016","price":679.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/31Mm9fcDL-L_edc24697-100b-4e9c-854c-965928bfd3bd.jpg?v=1771325652"},{"product_id":"adj-upr-arb-trailing-arm-80-105-rear-uta3036","title":"Adj UPR ARB Trailing Arm 80\/105 Rear (UTA3036)","description":"\u003cp\u003eARB Adj Upr Trailing Arm 80\/105 Rear (UTA3036) is designed for durability and function.\u003c\/p\u003e\u003cp\u003eThis product is suitable for various applications and meets all required testing standards.\u003c\/p\u003e","brand":"ARB Usa\/Old Man Emu","offers":[{"title":"Default Title","offer_id":51708897460506,"sku":"ARBUTA3036","price":638.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/61eLWjOjK2L.jpg?v=1771325688"},{"product_id":"adj-upper-trailing-arms-arb-gq-gu-utaa106","title":"Adj Upper Trailing Arms ARB Gq\/Gu (UTAA106)","description":"\u003cp\u003eARB Adj Upper Trailing Arms Gq\/Gu (UTAA106) are designed for specific applications.\u003c\/p\u003e\u003cp\u003eThese arms are adjustable and provide enhanced performance.\u003c\/p\u003e\u003cp\u003eThey are manufactured to meet high standards of quality and durability.\u003c\/p\u003e","brand":"ARB Usa\/Old Man Emu","offers":[{"title":"Default Title","offer_id":51708897689882,"sku":"ARBUTAA106","price":699.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/31ReUFPKffL_3f84fba7-bdd8-46ee-bc02-05b91c0ff8ad.jpg?v=1771325692"},{"product_id":"tubular-hd-rear-upper-control-arm-kit-ads-racing-shocks-pair-515ads","title":"Tubular HD Rear Upper Control Arm Kit ADS Racing Shocks - Pair 515ADS","description":"\u003cp\u003eUpgrade the rear of your 2021-2024 Ford Bronco with Heavy-Duty Tubular Steel Upper Control Arms.\u003c\/p\u003e\u003cp\u003eThese high-performance control arms are engineered for durability and feature 2.00-inch OD x .25-inch wall DOM steel construction with a sleek gloss black powdercoat finish.\u003c\/p\u003e\u003cp\u003eDesigned for superior strength and articulation, they utilize 1.25-inch heim joints and high-density polyurethane bushings for reduced deflection.\u003c\/p\u003e\u003cp\u003eEquipped with Grade 8 hardware, this control arm kit is fully rebuildable and delivers exceptional durability and reliability for all your off-road adventures.\u003c\/p\u003e","brand":"Arizona Desert Shocks","offers":[{"title":"Default Title","offer_id":51711064408346,"sku":"AZS515ADS","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/61ld94k_13L.jpg?v=1771387300"},{"product_id":"19-21-ford-ranger-belltech-2wd-4wd-front-upper-control-arm-pair-25121","title":"19-21 Ford Ranger Belltech 2WD\/4WD Front Upper Control Arm (Pair) - 25121","description":"\u003cp\u003eWhen altering the ride height of your vehicle, maintaining original suspension geometry is of utmost importance.\u003c\/p\u003e\u003cp\u003eDoing so results in a smooth, safe-feeling ride with better handling and performance.\u003c\/p\u003e\u003cp\u003eIt also prevents improper component wear, which is truly pertinent in the long term.\u003c\/p\u003e\u003cp\u003eFor these reasons, heavy-duty, high-quality steel control arms were designed by our engineers at Belltech for your -1\" or more lowered 2019+ fits Ford Ranger 2WD\/4WD.\u003c\/p\u003e\u003cp\u003eOur control arms correct negative camber, return proper ball joint angles, prevent unwanted pulling, and reduce tire wear.\u003c\/p\u003e\u003cp\u003eBuilt to last, they are easy to install.\u003c\/p\u003e","brand":"Belltech (KW Automotive)","offers":[{"title":"Default Title","offer_id":51711951700250,"sku":"BEL25121","price":470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/41ubHD62ZML.jpg?v=1771415934"},{"product_id":"alignment-kit-belltech-4955","title":"Alignment Kit Belltech 4955","description":"\u003cp\u003eWhen lowering your truck or SUV, many things on your vehicle can change and be put out of their operating range, causing unwanted issues such as: Incorrect Wheel Alignment, Increased tire wear, Driveline Shudders\/Vibrations etc.\u003c\/p\u003e\u003cp\u003eNot to worry, with its line of Front End, Driveline Alignment Kits \u0026amp; Pinion shims, Belltech has you covered.\u003c\/p\u003e\u003cp\u003eBelltech alignment kits provide you the solution for all of your alignment needs.\u003c\/p\u003e\u003cp\u003eA typical front end alignment kit from Belltech will consist of new eccentrics for the upper control arms which provide increased range of adjustment (typically up to 2 degrees) above and beyond what is offered from the factory.\u003c\/p\u003e\u003cp\u003eIf more adjustment for proper rear driveline angle is required, then our Driveline Alignment Kits are your solution, including Driveshaft Spacer - Universal Pinion Shims - Center Carrier Bearing Kit.\u003c\/p\u003e","brand":"Belltech (KW Automotive)","offers":[{"title":"Default Title","offer_id":51711967461658,"sku":"BEL4955","price":115.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/41vhMZrArkL.jpg?v=1771416480"},{"product_id":"alignment-kit-belltech-4957","title":"Alignment Kit Belltech 4957","description":"\u003cp\u003eWhen lowering your truck or SUV, many aspects of your vehicle can change and be put out of their operating range, causing unwanted issues such as: Incorrect Wheel Alignment, Increased tire wear, Driveline Shudders\/Vibrations etc.\u003c\/p\u003e\u003cp\u003eNot to worry, with its line of Front End, Driveline Alignment Kits \u0026amp; Pinion shims, Belltech has you covered.\u003c\/p\u003e\u003cp\u003eBelltech alignment kits provide the solution for all of your alignment needs.\u003c\/p\u003e\u003cp\u003eA typical front end alignment kit from Belltech will consist of new eccentrics for the upper control arms which provide increased range of adjustment (typically up to 2 degrees) above and beyond what is offered from the factory.\u003c\/p\u003e\u003cp\u003eIf more adjustment for proper rear driveline angle is required, then our Driveline Alignment Kits are your solution, including Driveshaft Spacer - Universal Pinion Shims - Center Carrier Bearing Kit.\u003c\/p\u003e","brand":"Belltech (KW Automotive)","offers":[{"title":"Default Title","offer_id":51711967658266,"sku":"BEL4957","price":143.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/612JFp_MujL.jpg?v=1771416489"},{"product_id":"brothers-trucks-trailing-arm-a6072l-60-left-2wd-w-rear-coil-springs","title":"Brothers Trucks Trailing Arm A6072L-60 - Left - 2WD w\/Rear Coil Springs","description":"\u003cp\u003eCompatible with Chevrolet C10\/C20 Series Trucks from 1960 to 1972.\u003c\/p\u003e\u003cp\u003eThese control arms (truck arms) are new and ideal for replacing rear control arms that are rusty or crash damaged on your truck.\u003c\/p\u003e\u003cp\u003ePainted black, these new arms include the front pivot bushings and are ready for installation.\u003c\/p\u003e","brand":"Brothers Truck","offers":[{"title":"Default Title","offer_id":51716713677082,"sku":"BRTA6072L-60","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/31o5KYOclML.jpg?v=1771505966"},{"product_id":"trailing-arm-brothers-trucks-a6072r-60-right-2wd-w-rear-coil-springs","title":"Trailing Arm Brothers Trucks A6072R-60 - Right - 2WD w\/Rear Coil Springs","description":"\u003cp\u003eCompatible with Chevrolet C10\/C20 Series Trucks from 1960 to 1972.\u003c\/p\u003e\u003cp\u003eThese control arms (truck arms) are ideal for replacing rear control arms that are rusty or crash damaged on your truck.\u003c\/p\u003e\u003cp\u003ePainted black, these new arms include the front pivot bushings and are ready for installation.\u003c\/p\u003e","brand":"Brothers Truck","offers":[{"title":"Default Title","offer_id":51716713709850,"sku":"BRTA6072R-60","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/318ijnV_C4L.jpg?v=1771505968"},{"product_id":"brothers-trucks-left-lower-control-arm-shaft-casl062-front-left-rwd","title":"Brothers Trucks Left Lower Control Arm Shaft CASL062 - Front - Left - RWD","description":"\u003cp\u003eCompatible with Chevrolet\/GMC C10\/C15 from 1960 to 1962.\u003c\/p\u003e\u003cp\u003eAre your lower control arm bushings worn, causing handling issues?\u003c\/p\u003e\u003cp\u003eThis lower front control arm cross shaft replacement includes seals, bushings, end caps, and grease seals.\u003c\/p\u003e\u003cp\u003eNew suspension components can enhance your truck's handling and performance.\u003c\/p\u003e\u003cp\u003eFits trucks with rear wheel drive.\u003c\/p\u003e","brand":"Brothers Truck","offers":[{"title":"Default Title","offer_id":51716722262298,"sku":"BRTCASL062-LEFT","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/31U7sHNL9vL.jpg?v=1771506197"},{"product_id":"brothers-trucks-lower-control-arm-shaft-casl062-rh-front-right-rwd","title":"Brothers Trucks Lower Control Arm Shaft CASL062-RH - Front - Right - RWD","description":"\u003cp\u003eCompatible with Chevrolet\/GMC C10\/C15 from 1960 to 1962.\u003c\/p\u003e\u003cp\u003eAre the bushings in your control arms lower worn causing handling problems?\u003c\/p\u003e\u003cp\u003eThis lower front control arm cross shaft replacement includes seals, bushings, end caps, and grease seals.\u003c\/p\u003e\u003cp\u003eNew suspension components can improve handling and performance of your truck.\u003c\/p\u003e\u003cp\u003eFits trucks with rear wheel drive.\u003c\/p\u003e","brand":"Brothers Truck","offers":[{"title":"Default Title","offer_id":51716722295066,"sku":"BRTCASL062-RH","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/31U7sHNL9vL_83f622fb-7a84-4826-a9ca-14190148d23f.jpg?v=1771506198"},{"product_id":"lower-control-arms-brothers-trucks-lca6772-1-2-ton-rwd-black-pair","title":"Lower Control Arms Brothers Trucks LCA6772 - 1\/2 Ton - RWD - Black - Pair","description":"\u003cp\u003eCompatible with Chevrolet\/GMC C10\/C15 from 1963 to 1972.\u003c\/p\u003e\u003cp\u003eThis complete set of lower control arms features a black powder coated finish with new bushings and cross shafts installed.\u003c\/p\u003e\u003cp\u003eIdeal for converting 3\/4 ton trucks to 1\/2 ton for disc brake conversion.\u003c\/p\u003e\u003cp\u003eAlso suitable for replacing damaged originals on 1\/2 ton trucks.\u003c\/p\u003e\u003cp\u003eLower ball joint is not included.\u003c\/p\u003e","brand":"Brothers Truck","offers":[{"title":"Default Title","offer_id":51716746150170,"sku":"BRTLCA6772","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/41L8e55eAPL.jpg?v=1771506849"},{"product_id":"tac72as-brothers-trucks-dropped-trailing-arm-crossmember-anti-squat-shortbed","title":"TAC72AS Brothers Trucks Dropped Trailing Arm Crossmember - Anti-Squat - Shortbed","description":"\u003cp\u003eCompatible with Chevrolet\/GMC C10\/C15 from 1963 to 1972.\u003c\/p\u003e\u003cp\u003eDesigned for 2WD 1\/2-ton trucks that have been lowered 4 inches or more and feature rear trailing arm and rear coil spring rear suspension.\u003c\/p\u003e\u003cp\u003eThis part increases ground clearance on lowered trucks.\u003c\/p\u003e\u003cp\u003eBolt-on anti-squat mounts allow for the use of five different trailing arm settings.\u003c\/p\u003e\u003cp\u003eThe lower hole is for factory trailing arm position and is adjustable for up to 4 degrees of anti-squat, allowing more drive off corners for better performance.\u003c\/p\u003e\u003cp\u003eDesigned for applications with shortbed and one-piece driveshafts.\u003c\/p\u003e\u003cp\u003eLong bed trucks can also use this part but will require modifications to drill and mount the factory carrier bearing for the driveshaft.\u003c\/p\u003e","brand":"Brothers Truck","offers":[{"title":"Default Title","offer_id":51716766171418,"sku":"BRTTAC72AS","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/41_Dl_T-nWL.jpg?v=1771507402"},{"product_id":"tcl87cs-brothers-trucks-tubular-lower-control-arms-1-2-ton-rwd-black-pair","title":"TCL87CS Brothers Trucks Tubular Lower Control Arms- 1\/2 Ton- RWD - Black - Pair","description":"\u003cp\u003eCompatible with Chevrolet\/GMC C10\/C15 from 1973 to 1987.\u003c\/p\u003e\u003cp\u003eDesigned to add an additional 5 degrees of caster while still providing full wheel travel, BROTHERS tubular control arms are constructed of thick steel to provide strength under hard driving conditions.\u003c\/p\u003e\u003cp\u003eIncludes cross-shafts made of billet alloy with self-lubricating bushings.\u003c\/p\u003e\u003cp\u003ePerformance and additional ground clearance can be achieved with no modifications required.\u003c\/p\u003e\u003cp\u003eBall joints are included.\u003c\/p\u003e\u003cp\u003eSold as a pair with one control arm for each side of the truck.\u003c\/p\u003e","brand":"Brothers Truck","offers":[{"title":"Default Title","offer_id":51716766335258,"sku":"BRTTCL87CS","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/41dqCZ7WGjL.jpg?v=1771507407"},{"product_id":"tubular-brothers-trucks-front-upper-control-arms-pair-black-tcu8700","title":"Tubular Brothers Trucks Front Upper Control Arms - Pair - Black TCU8700","description":"\u003cp\u003eCompatible with Chevrolet\/GMC C10\/C15, Blazer\/Jimmy (RWD 1\/2-ton) \u0026amp; Suburban (RWD 1\/2-ton) from 1973 to 1987.\u003c\/p\u003e\u003cp\u003eDesigned to add an additional 5 degrees of caster while still providing full wheel travel, BROTHERS tubular control arms are constructed of thick steel for strength under hard driving conditions.\u003c\/p\u003e\u003cp\u003eIncludes self-lubricating bushings and billet alloy cross-shafts.\u003c\/p\u003e\u003cp\u003eFinished in black powercoat, these control arms offer bolt-on performance with no modifications required.\u003c\/p\u003e","brand":"Brothers Truck","offers":[{"title":"Default Title","offer_id":51716766466330,"sku":"BRTTCU8700","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/611kM4HE15L.jpg?v=1771507413"},{"product_id":"trackdlx65-72-brothers-trucks-deluxe-track-arm-kit-lowered-truck-adjustable-rwd","title":"TRACKDLX65-72 Brothers Trucks Deluxe Track Arm Kit - Lowered Truck - Adjustable - RWD","description":"\u003cp\u003eCompatible with Chevrolet\/GMC C10\/C15, Blazer\/Jimmy (RWD) \u0026amp; Suburban (RWD) from 1965 to 1972.\u003c\/p\u003e\u003cp\u003eThe adjustable track arm kit replaces the factory part and is designed for trucks lowered 4-inches or more.\u003c\/p\u003e\u003cp\u003eThis track arm includes the mounting bracket and polyurethane bushings for a firmer and sportier ride, and is adjustable to center the rear axle when the ride height changes.\u003c\/p\u003e","brand":"Brothers Truck","offers":[{"title":"Default Title","offer_id":51716768104730,"sku":"BRTTRACKDLX65-72","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/31F45oYKuAL.jpg?v=1771507459"},{"product_id":"upper-front-control-arms-brothers-trucks-uca6772-pair-black","title":"Upper Front Control Arms Brothers Trucks UCA6772 - Pair - Black","description":"\u003cp\u003eCompatible with Chevrolet\/GMC C10\/C15, Blazer\/Jimmy (2WD 1\/2-ton) \u0026amp; Suburban (2WD 1\/2-ton) from 1963 to 1972.\u003c\/p\u003e\u003cp\u003eComplete upper control arms include installed new cross shafts and bushings.\u003c\/p\u003e\u003cp\u003eGreat for replacing originals that are damaged on 1\/2 ton trucks.\u003c\/p\u003e\u003cp\u003eThe upper ball joint is not included.\u003c\/p\u003e","brand":"Brothers Truck","offers":[{"title":"Default Title","offer_id":51716768694554,"sku":"BRTUCA6772","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/41BUlFKHZCL.jpg?v=1771507476"},{"product_id":"automotive-crown-bolt-34202118","title":"Automotive Crown Bolt (34202118)","description":"\u003cp\u003eCrown Automotive carries over 9600 unique quality replacement parts for every model of Jeep produced since 1941, encompassing over 766,000 different applications.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51719787413786,"sku":"CAS34202118","price":74.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/51xydqbOSmL.jpg?v=1771581496"},{"product_id":"automotive-crown-control-arm-suspension-6","title":"Automotive Crown Control Arm Suspension","description":"\u003cp\u003eCrown Automotive carries over 9600 unique replacement parts of quality, encompassing over 766,000 different applications for every Jeep model produced since 1941.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51719888601370,"sku":"CAS5168158AA","price":298.38,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/5109UQzqt_L.jpg?v=1771583996"},{"product_id":"automotive-crown-control-arm-suspension-7","title":"Automotive Crown Control Arm Suspension","description":"\u003cp\u003eCrown Automotive carries over 9600 unique quality replacement parts for every model of Jeep produced since 1941, encompassing over 766,000 different applications.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51719888666906,"sku":"CAS5168159AA","price":298.38,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/51h-D1ZcmbL.jpg?v=1771583996"},{"product_id":"automotive-crown-control-arm-suspension-black","title":"Automotive Crown Control Arm Suspension, black","description":"\u003cp\u003eCrown Automotive carries over 9600 unique replacement parts of quality, encompassing over 766,000 different applications for every Jeep model produced since 1941.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51719896826138,"sku":"CAS52001162","price":51.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/71HtHul_GtL.jpg?v=1771584218"},{"product_id":"trailing-arm-crown","title":"Trailing Arm Crown","description":"\u003cp\u003eCrown Trailing Arm is a durable component designed for vehicles.\u003c\/p\u003e\u003cp\u003eIt is made from rubber steel and features a black color.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51720109654298,"sku":"CAS68246734AA","price":96.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/41zi90tsr7L.jpg?v=1771587418"},{"product_id":"trailing-arm-crown-2","title":"Trailing Arm Crown","description":"\u003cp\u003eCrown Trailing Arm is a durable component designed for Jeep Fiat vehicles.\u003c\/p\u003e\u003cp\u003eIt features high quality construction with rubber and steel materials.\u003c\/p\u003e\u003cp\u003eThe color of the arm is black.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51720109719834,"sku":"CAS68246739AA","price":96.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/41W_hXHmZL_77ddfc8b-118e-44c6-9704-792dc9ffb448.jpg?v=1771587420"},{"product_id":"crown-control-arm-crown-automotive","title":"Crown Control Arm Crown Automotive","description":"\u003cp\u003eCrown Control Arm.\u003c\/p\u003e\u003cp\u003eCrown Control Arm.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51720110178586,"sku":"CAS68247999AA","price":111.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/51Q3kn8faoL_949e79db-ebf2-43cf-bb5d-901ed773bf19.jpg?v=1771587430"},{"product_id":"crown-control-arm-crown-automotive-2","title":"Crown Control Arm Crown Automotive","description":"\u003cp\u003eCrown Control Arm.\u003c\/p\u003e\u003cp\u003eCrown Control Arm.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51720110244122,"sku":"CAS68248006AA","price":111.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/51b0e7KppJL.jpg?v=1771587431"},{"product_id":"control-arm-crown-68277340ac","title":"Control Arm Crown (68277340AC)","description":"\u003cp\u003eCrown Automotive carries over 9600 unique quality replacement parts for every model of Jeep produced since 1941, encompassing over 766,000 different applications.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51720113258778,"sku":"CAS68277340AC","price":54.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/413u07fwssL.jpg?v=1771587495"},{"product_id":"control-arm-crown-automotive","title":"Control Arm Crown Automotive","description":"\u003cp\u003eControl Arm.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51720113324314,"sku":"CAS68277341AC","price":54.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/51rSrIq3F7L.jpg?v=1771587497"},{"product_id":"control-arm-kit-crown-automotive","title":"Control Arm Kit Crown Automotive","description":"\u003cp\u003eCrown Control Arm Kit is designed for Jeep vehicles.\u003c\/p\u003e\u003cp\u003eIt features high quality construction and is made from rubber steel.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51720153727258,"sku":"CASCAK12","price":169.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/611i8YSO0SL.jpg?v=1771588235"},{"product_id":"rt-off-road-crown-automotive-control-arm-kit","title":"RT Off-Road Crown Automotive Control Arm Kit","description":"\u003cp\u003eCrown RT Off-Road Control Arm Kit.\u003c\/p\u003e\u003cp\u003eCrown RT Off-Road Control Arm Kit.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51720153825562,"sku":"CASCAK13","price":334.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/51vwCZzaUKL.jpg?v=1771588236"},{"product_id":"automotive-crown-rt21015-control-arm","title":"Automotive Crown RT21015 Control Arm","description":"\u003cp\u003eControl Arm Bracket Set RT Off-Road is included.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51720319467802,"sku":"CASRT21015","price":55.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/71rlVrBqFpL.jpg?v=1771590482"},{"product_id":"adjustable-control-arm-set-crown-automotive-rt-off-road-crart21057","title":"Adjustable Control Arm Set Crown Automotive RT Off-Road (CRART21057)","description":"\u003cp\u003eA set of Heavy Duty Adjustable Rear Lower Control Arm Set from RT Offroad improves your Jeep's drivability.\u003c\/p\u003e\u003cp\u003eConstructed of 2\" DOM Tubing, each arm is finished with a matte black powder coat.\u003c\/p\u003e\u003cp\u003eDesigned for heavy use, the control arms feature a zinc coated forged end with 1.25\" threads.\u003c\/p\u003e\u003cp\u003eOE-style rubber bushings are included at each end to retain factory ride quality while offering some articulation.\u003c\/p\u003e\u003cp\u003eThe adjustability of these control arms allows the caster and pinion angle to be tuned to factory specifications.\u003c\/p\u003e\u003cp\u003eEach kit includes a pair of fully assembled control arms.\u003c\/p\u003e","brand":"Crown Automotive","offers":[{"title":"Default Title","offer_id":51720320680218,"sku":"CASRT21057","price":198.51,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/510LC4oNJqL.jpg?v=1771590517"},{"product_id":"howitzer-combat-off-road-lower-control-arms-black-front-pair-compatible-with-jeep-jk-jku","title":"Howitzer Combat Off Road Lower Control Arms Black - Front Pair compatible with Jeep JK\/JKU","description":"\u003cp\u003eCompatible with the Jeep Wrangler JK\/JKU from 2007-2018, the Howitzer Lower Control Arms are machined from 6061 T6 billet aluminum to provide the strength needed for extreme missions.\u003c\/p\u003e\u003cp\u003eThe rod ends feature covering shields that protect them from dirt, salt, sand, and other road debris.\u003c\/p\u003e\u003cp\u003eWith LH\/RH threads on the rod ends, the arms can be adjusted without removing them from the Jeep, allowing for 45 degrees of articulation in the joint.\u003c\/p\u003e\u003cp\u003eThey are compatible with lift kits ranging from 2\" to 5.5\".\u003c\/p\u003e\u003cp\u003eAvailable in raw aluminum and anodized black.\u003c\/p\u003e","brand":"Combat Off Road","offers":[{"title":"Default Title","offer_id":51720356921626,"sku":"CBF15-1026","price":599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/61xlLz5GH_L.jpg?v=1771591295"}],"url":"https:\/\/trybeepbeep.com\/collections\/shop-control-arms.oembed","provider":"TryBeepbeep","version":"1.0","type":"link"}