{"product_id":"1-2-x-1-2-flair-it-elkhart-straight-stop-valve","title":"1\/2\" x 1\/2\" Flair-It Elkhart Straight Stop Valve","description":"\u003cp\u003eFor fittings of hot and cold potable water (150 degrees at 100 psi).\u003c\/p\u003e\u003cp\u003eCut the end of tubing squarely, then slide the nut over the tubing.\u003c\/p\u003e\u003cp\u003ePress the tubing firmly onto the flare of the fitting.\u003c\/p\u003e\u003cp\u003eHand tighten the nut securely onto the fitting by sliding it to the threads.\u003c\/p\u003e\u003cp\u003eIf necessary, turn an additional 1\/4 turn with a wrench.\u003c\/p\u003e\u003cp\u003eAvoid using any 2 Inch pipe dopes, sealants, Teflon tape, or other chemicals on Flair-It connections.\u003c\/p\u003e\u003cp\u003eHowever, Teflon tape should be applied on male pipe threads when connecting to female threads.\u003c\/p\u003e\u003cp\u003eWhen connecting to brass, galvanized steel, or CPVC, a male Flair-It fitting should be used instead of a female fitting.\u003c\/p\u003e\u003cp\u003eFor connections to a water heater in a mobile home, it is recommended to use a 1\/2 Inch flex copper connector off of the water heater.\u003c\/p\u003e\u003cp\u003eFrom a flex connector to polybutylene, a Flair-It male adapter should be used.\u003c\/p\u003e\u003cp\u003eDo not use in a closed loop system.\u003c\/p\u003e\u003cp\u003eJoints should not be made under concrete.\u003c\/p\u003e\u003cp\u003eIncluded are nuts.\u003c\/p\u003e\u003cp\u003eFlair-It Straight Stop Valve 1\/2 Inch FL x 1\/2 Inch FL.\u003c\/p\u003e","brand":"Esco Elkhart Supply Company","offers":[{"title":"Default Title","offer_id":51725870563610,"sku":"ESC06880","price":29.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/8942\/8506\/files\/71juBXVBPpL.jpg?v=1771664758","url":"https:\/\/trybeepbeep.com\/products\/1-2-x-1-2-flair-it-elkhart-straight-stop-valve","provider":"TryBeepbeep","version":"1.0","type":"link"}