Towing safely starts with matching every part of the setup: the hitch receiver on the truck, the ball mount, the ball and the trailer. The lowest rating in that chain is your real towing limit. Here is how to read the ratings and choose the right ball mount.
1. Know your hitch class
| Class | Receiver | Typical max trailer weight |
|---|---|---|
| Class I | 1-1/4 in | Up to 2,000 lb |
| Class II | 1-1/4 in | Up to 3,500 lb |
| Class III | 2 in | Up to 8,000 lb |
| Class IV | 2 in | Up to 10,000 lb |
| Class V | 2 in or 2-1/2 in | Up to about 20,000 lb |
These are typical ranges. Your vehicle's owner manual and the label on the hitch give the real numbers, and your truck's own towing rating always wins.
2. Get the tongue weight right
Tongue weight is the downward force the trailer puts on the ball. Aim for about 10 to 15 percent of the loaded trailer weight. Too little and the trailer can sway; too much and the rear of the truck squats and steering gets light. Some ball mounts, like the Weigh Safe 8 in drop hitch, have a built-in scale so you can read tongue weight at the ball.
3. Measure drop or rise
A level trailer tows best. Park on flat ground and measure:
- from the ground to the top inside of your truck's receiver opening
- from the ground to the bottom of the trailer coupler, with the trailer level
The difference is the drop (or rise) you need. Adjustable mounts let you change it between trailers, which helps if you tow more than one.
4. Match the ball size to the coupler
The common sizes are 1-7/8 in, 2 in and 2-5/16 in. The size is stamped on the trailer coupler. Dual-ball mounts, like the BulletProof Hitches 6 in drop/rise with 2 in and 2-5/16 in balls, let you flip to the size you need.
Ball mounts we stock
- BulletProof Hitches adjustable heavy duty, 6 in drop/rise
- Weigh Safe 8 in drop with built-in scale
- B&W Tow & Stow dual-ball, 3 in drop
Browse more in ball mounts and hitch balls and trailer hitches. Questions about your setup? Email info@trybeepbeep.com.

