Flood Protection Liquid should primarily be used as a final layer of protection to seal any small pinholes or openings that may have been missed.
Use Flood Protection Liquid in combination with our other products for Flood Protection.
Our Flood Protection Liquid starts as a liquid.
It seeps into gaps, cracks, and openings and dries to a strong, flexible, rubberized, watertight coating.
It seals out water while remaining flexible.
When applying Flood Liquid, make sure each coat is wider and overlaps previous layers of our Flood Protection products.
Once floodwaters recede, our Flood Liquid can be easily removed.
For complete instructions, please reference our pdf.
DRY TIME: Depending on temperature, humidity, and thickness of coating, Flood Liquid will dry to the touch in approximately 3 to 6 hours and fully cure in approximately 24-48 hours.
Allow the product to fully cure before floodwaters arrive.
Flood Liquid begins to cure when exposed to air.
Always keep the lid on tight during and after use.
Remove any dried material and always use fresh liquid to seal an opening.
COVERAGE: The coverage for one coat of the 320 oz flood liquid, when applied 2 inches wide, is approximately 590 linear feet.
IMPORTANT INFORMATION: Always follow local warnings regarding evacuations.
Depending on the age and type of construction, there may be areas that cannot be seen or sealed.
Unsealed porous surfaces, such as concrete, can seep water during extended underwater exposure.
Our Flood Protection products are NOT intended for flash floods, extreme winds or water pressure, to protect against flying or floating debris, or if there is structural damage to the building.
ADDITIONAL INFO: Made in the USA with globally sourced materials.
The color of the product is high-visibility yellow.
For more information on UL testing, please visit their site.
