.250 /6.4 mm Tab Size UL 310 Nylon Insulated with Insulation Grip & Double Crimp, Funnel Entry.
ANCOR supplies a full line of tinned copper, nylon insulated terminals for the highest quality electrical systems.
Designed for the harsh marine environment, ANCOR's Marine Grade terminals differ from automotive terminals.
Easy to crimp, our nylon insulators will not split.
The barrels are designed to grip the wire tightly with the least effort.
The tinned copper provides the least electrical resistance and the most corrosion protection.
Crimping Instructions Strip 5/16" of insulation off the wire exposing the conductor.
(ANCOR's 702030 Wire Stripper can be adjusted for the required stripping length).
To open the tool, close the handles past the ratchet release position which will allow the jaws to open fully.
Ensure the terminal is compatible with the wire size you are using.
When placing the terminal into the appropriate color-coded cavity, ensure the ring portion of the terminal is parallel to the crimping die.
Important!
When placing the terminal into the appropriate color-coded nest, ensure the area to be crimped onto the exposed wire strands is opposite the colored dot and on the smooth arc side of the die.
The opposite colored dot side of the die with the indent in each cavity is designed to put the second crimp in the insulation portion of the wire.
Close the tool carefully until the jaws grip the terminal lightly and hold it in place without distortion.
Insert the properly stripped wire into the terminal allowing the wire to stick out 1/32" beyond the edge of the terminal barrel.
Ensure the strands do not extend into the contact area.
Holding the wire in place, squeeze the handles past the ratchet release position and allow the jaws to spring open.
The crimp is now complete.
Check the finished crimp to see that the wire is held firmly in place.
