Fits Chevrolet Camaro and Pontiac Firebird from 1970 to 1981.
These steering shaft kits by Holley were designed to replace a worn stock one on your 2nd Gen GM F-Body vehicles or with an engine swap where additional clearance may be needed.
With a collapsed length of 16 3/4 inches, a max extended length of 23 1/2 inches, strong DD style steel shafts, and dual u-joints (1 inch x 48-spline top column joint and 3/4 inch 30-spline lower steering box joint), there is plenty of adjustability for your project to ensure everything is exact and safe.
It is extremely important that these steering shafts are installed by a qualified technician.
Failing to do so will result in an unsafe vehicle.
If installing these shafts with an OE steering box, you may need to trim the pin on the input shaft for U-joint clearance.
Loctite 242, extra grease, and a torque wrench are highly recommended.
For 1978-1981 Camaro/Firebird, you will need a 3/4 inch DD-to-DD U-joint to adapt to the column side.
Reference Holley part number CSC72UJ1.
