Inner Frame Bracket adjustable (single).
The perfect complement to your Spring Over Axle (SOA) swap and Artec Modular Truss.
By spreading load to 4 bolts rather than 2, U-bolts are eliminated to increase strength.
For seamless transition between Artec Modular Trusses, truss end caps are included.
For one inch adjustments forward or back, three leaf pin positions are available.
The bracket's style gives a unique, custom one-off look that you'd get with a high dollar fabrication shop.
No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
Details: Sold as Each Angle: 0 degrees Side: Front Passenger/Rear Drive Side Is Based On Front Application (i.e.
Front Driver) One inch separation between each hole For adjustability.
Floating top gusset allows any height frame.
Frame plate adds strength and a surface to weld bracket to with jigs For easy assembly.
2.625 inch mounting width with 9/16 inch bolt hole For common sized Cartridge Joints (Johnny, Flex, Ballistic, etc).
Can be drilled out to larger hole size For 1.25 inch rod ends with spacers.
Can be easily modified For smaller joints Made from 1/4 inch thick boxed steel plate For strength and impact resistance.
Grease fitting access on top allows easy maintenance of your most abused joint.
The skid plate at the bottom of the bracket wraps around the joint, protecting it from direct impact and decreasing premature wear on the joint.
This leads to longer life and less replacements.
The skid plate design does not restrict movement of the joint.
