3 Link Kit F For Artec Trusses.
The simplest way to get your links done is our Easy 3-Link Kit G.
Based off our most popular parts, this Kit is for a 3-link with panhard bar.
Intended for use with our 60 trusses, if you aren't using a truss, please select Kit G.
The strongest and longest lasting on the market are the heat and cryogenically treated chromo rod ends.
Feature machined Wrench Flats for Easy adjustments and tightening, the included tube adapters conform to the outer diameter of the tubing it welds to.
Maximum articulation Inch the rod end is allowed by the included stainless steel high misalignment spacers.
This Kit offers four foot lengths of both 1.5 inch and 2.0 inch tubing to be cut to the exact length needed for your particular vehicle.
Drilling of lower link holes to 3/4 inch will be required unless you specify you'd like 9/16 inch bolts for your lower links.
Features: Tubing: Yes Panhard Frame Orientation: Outside Frame Which Artec Truss are you using: Chevy/Ford 78-79 Upper Link Side Inner Frame mount: Front Driver/Rear passenger Sold as Kit Includes: 1 RH, 1 LH - 7/8 inch -14tpi x 3/4 inch bore rod ends for panhard 1 RH, 1 LH - 7/8 inch -14tpi Tube Adapters for panhard 1 RH, 1 LH - 7/8 inch -14tpi Jam nuts for panhard 4 - 3/4 inch-9/16 inch High Misalignment Spacers 3 RH, 3 LH - 1.25 inch -12tpi x 1.0 inch bore rod ends 3 RH, 3 LH - 1.25 inch -12tpi Tube Adapters 3 RH, 3 LH - 1.25 inch -12tpi Jam nuts 12 - 1.0 inch-3/4 inch High Misalignment Spacers 2 - Lower Link Frame Brackets 1 - Pair Lower Link Axle Brackets (10 dig) 1 - Single Truss Upper Link Mount (2.63 inch) 1 - Inner Frame Bracket (0 dig) - Choose Driver Or Passenger 1 - Adjustable Panhard Frame Mount - Choose Orientation 1 - Adjustable Panhard Truss Mount - Choose Truss 1 - 4 ft 1.5 inch OD .250 inch thick DOM tubing (optional) 3 - 4 ft 2.0 inch OD .250 inch thick DOM tubing (optional).
