The Clear lens serves as a direct replacement for the original main lens in your SS3 LED Pod.
It can be used to change the output pattern and color with a quick swap!
Each lens is made of durable optical-grade polycarbonate and includes an integrated o-ring to maintain a watertight seal.
Available in clear material, SS3 LED pod lenses produce white light or a selective yellow filter.
By swapping out the lens, you can change the color of your lights, but please note that changing colors may not be perfect with these lenses, as different LEDs are used depending on the color of light you originally purchased.
If you originally purchased White pods, they have 6000K white emitters.
Yellow SS3s come with 4000K emitters.
If you install these replacement yellow lenses on a pod that was originally white, the result will be a light, hyper yellow color, as the cool white LEDs shine through the yellow lens.
It will not match standard Yellow SS3 pods, which are a golden yellow color.
To match the original yellow color, we recommend our yellow covers, which produce more of a golden yellow color.
Changing the main lens in the SS3 takes just a few seconds!
Remove the four torx-head screws from the back frame, pull the old lens and o-ring assembly out, and insert your new lens, which comes with the o-ring preinstalled.
Take care not to touch the inner optical surface of your new lens during the swap, or wear gloves to keep things clean.
The locating pins ensure correct alignment and rotation.
Reinstall the four screws so they are very hand-tight, and you are ready to shine in your new color or beam pattern!
Diode Dynamics Stage Series LED lighting includes a 3-year replacement warranty and an 8-year limited warranty.
If you disassemble and replace the lens on your SS3 pod, you still keep your 8-year limited warranty intact.
However, we may require the light to be sent in for any service and repair, rather than immediate replacement.
All Stage Series beam pattern options were designed with optical simulation modeling to shape the output in a highly-functional beam pattern.
No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!
Driving is designed to supplement your high beams, but it is also great for general illumination.
Rather than a traditional spot pattern, the Stage Series Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds.
Please note that yellow Driving is not an SAE compliant pattern, as road-legal Driving lights must be white in color.
SAE Fog provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread.
It serves as a great upgrade for any factory foglamp and will fully illuminate the area in front of your vehicle.
