Softride Skyjacker D200S 1.5" - 2.5" Leaf Spring

More about this item : Softride Skyjacker D200S 1.5" - 2.5" Leaf Spring

Softride springs utilize only American steel, and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities.

This shot-peening compresses the surface of the steel, thereby increasing the tensile strength of the spring.

Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring.

Bolt style spring clips are used by Softride springs, eliminating friction.

Other spring designs use cinch style bend clips, which bend tightly over the spring leafs, causing binding and friction.

Skyjacker Softride springs taper over the entire length of the leaf, creating more flex at the leaf ends.

This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.